- Joined
- May 13, 2021
- Messages
- 1,989
This is going to sound crazy but it looks like I can tune the thermostat with the pipe cap. I know it lifts about 245-255 without the cap. With the cap on just enough to stay put and still come apart easy it went up to about 315 and lifted so I pushed the cap down about a 1/4 inch and now it lifts about 290. I'm going to leave it there until I see how it acts once installed. I can still probably push it down close to another 1/2 inch if needed. I'm guessing this is working do to it cooling with more or less copper exposed or more or less cooling area taking heat away through the cap and pipe.