Red rust (ferric iron) on cast iron (ferrous iron) can be removed in several ways. On way was mentioned earlier, soaking for several days in a molasses (or any sugar for that matter) and water mixture. What happens is, the mixture turns anaerobic and the ferric iron (red) is reduced to ferrous iron (gray).
Another way, is by soaking in a sugary, acidic soda, like Coke or Mtn Dew.
You don't really have to grind cast iron. It is very soft, at least my Lodge stuff was. Simple sand paper, especially on a power tool, will smooth it out very quickly. Of course you have to re-season after doing that though. I was able to do the bottom and sides of the skillet with the oscillating tool, but the corners where the sides and bottom meet had to be done by hand. But that went really quick. I was expecting to have to use a lot of elbow grease. Not really. I wrapped the sandpaper around some thin rounded thing - I can't remember what it was at the moment, just some piece of junk I found in the garage - and that allowed me to do the corners quickly. If your corners are really rough (mine weren't), I suppose you could use a Dremel Tool with one of those miniature rounded grinding attachments.As far as grinding a skillet surface, don't see why not.
I got this infrared on one of the Amazon Prime Day events. Definitely less than $15 though.
Yes, the new Lodge cast iron has a bumpy surface. I find that very strange.I don't have any of the old, quality cast iron. The only thing I have is a Lodge brand skillet. Those things come pre-seasoned and feel kind of "bumpy". I can't imagine that things wouldn't stick to that mess, so I didn't give it a chance.
I figured this Lodge stuff is cheap enough, so I wouldn't mind if I ruined it.
So I went after my new skillet with a power sander. One of those oscillating tools with a triangular sander attachment. I got the inside of the skillet glass smooth (didn't worry about the outside). I then seasoned the skillet very carefully using grapeseed oil. That took all day, as I kept repeating the process to try and get a good initial seasoning.
It came out great! Nothing sticks to that baby, and everything cooks well. Not bad for a piece of cheap Lodge cast iron. I wanted to try something inexpensive and common first, to see if I liked cooking on cast iron. I do. Cleanup is a little more tedious than with other cookware, but not bad.
The way I clean if it's grungy - right or wrong - is I first reheat the skillet to about 300 surface temp on a stove burner (I have an infrared thermometer). Then I get the water from the faucet as hot as I can (about 140 I think it's set to). Then the skillet gets a little bit of that hot faucet water in it, which immediately boils. I then use a plastic scraper to get what's left off. I dry it with a lint-free cloth. Back on the stove burner to be reheated to 300 to cook off any remaining moisture. I then add a bit of oil and wipe it all down with a different lint-free cloth. If things look perfect, I'm done. If not, I add a tad more oil (the skillet is still very hot) and some course ground Kosher salt. This does not dissolve in the oil. Then out comes another lint-free cloth to do a scouring with that salt. That salt always takes ever last thing off the skillet (except the seasoning). One final wipe down with a lint-free cloth to get all the salt out and I'm done. I let it cool and put it away. I wash the lint-free clothes by hand with liquid dish soap, let them dry, and put them away for next time.
Who knows if what I did for that initial sanding and seasoning was "right". Or if my cleaning technique is "normal". But they seem to work for me and my cheap Lodge cast iron. I will probably buy a few more pieces of cast iron in the future. I doubt that I will fully convert to it for all cooking though. There's something very convenient about a quick over easy egg on a good non-stick pan. Cleanup for that takes seconds. I use the cast iron for larger dinners where I will be cooking for a longer time.
Same way we clean ours except I've never had to use a metal pad to clean, just a nylon brush and boiling water in the pan.Yes, the new Lodge cast iron has a bumpy surface. I find that very strange.
I have a laser temp gun but I mostly use it to be sure my lizards have the proper basking temps for belly heat and digestion.
As for cleaning my cast iron, I usually rinse it to remove most of the loose stuff. Then I put water in it and let it boil for a couple minutes. When it cools enough to handle, I let hot water run and scrub it out with a stuff nylon brush. Sometimes I need to give it a quick, light rub with a steel or copper scrubbie pad.
Yes, the new Lodge cast iron has a bumpy surface. I find that very strange.
That bumply finish is just the cast finish. They used to mill the cooking surface which they no longer do. Hubby used a scotchbrite on the surface of the griddle because it was like that. Same result I'm guessing.I don't have any of the old, quality cast iron. The only thing I have is a Lodge brand skillet. Those things come pre-seasoned and feel kind of "bumpy". I can't imagine that things wouldn't stick to that mess, so I didn't give it a chance.
I figured this Lodge stuff is cheap enough, so I wouldn't mind if I ruined it.
So I went after my new skillet with a power sander. One of those oscillating tools with a triangular sander attachment. I got the inside of the skillet glass smooth (didn't worry about the outside). I then seasoned the skillet very carefully using grapeseed oil. That took all day, as I kept repeating the process to try and get a good initial seasoning.
It came out great! Nothing sticks to that baby, and everything cooks well. Not bad for a piece of cheap Lodge cast iron. I wanted to try something inexpensive and common first, to see if I liked cooking on cast iron. I do. Cleanup is a little more tedious than with other cookware, but not bad.
The way I clean if it's grungy - right or wrong - is I first reheat the skillet to about 300 surface temp on a stove burner (I have an infrared thermometer). Then I get the water from the faucet as hot as I can (about 140 I think it's set to). Then the skillet gets a little bit of that hot faucet water in it, which immediately boils. I then use a plastic scraper to get what's left off. I dry it with a lint-free cloth. Back on the stove burner to be reheated to 300 to cook off any remaining moisture. I then add a bit of oil and wipe it all down with a different lint-free cloth. If things look perfect, I'm done. If not, I add a tad more oil (the skillet is still very hot) and some course ground Kosher salt. This does not dissolve in the oil. Then out comes another lint-free cloth to do a scouring with that salt. That salt always takes ever last thing off the skillet (except the seasoning). One final wipe down with a lint-free cloth to get all the salt out and I'm done. I let it cool and put it away. I wash the lint-free clothes by hand with liquid dish soap, let them dry, and put them away for next time.
Who knows if what I did for that initial sanding and seasoning was "right". Or if my cleaning technique is "normal". But they seem to work for me and my cheap Lodge cast iron. I will probably buy a few more pieces of cast iron in the future. I doubt that I will fully convert to it for all cooking though. There's something very convenient about a quick over easy egg on a good non-stick pan. Cleanup for that takes seconds. I use the cast iron for larger dinners where I will be cooking for a longer time.
I love the trivets for the inside bottom of your Dutch ovens. I wish I had some. I generally use stones in place of a trivet.I like cast iron gear when I am campfire cooking.
I have cast iron for my camping gear that also is part of my INCH kits.
This cook set is made up of a 9 quart dutch oven, 2.5 quart dutch oven, cast fry pan (with removable handle that doubles as a pot/lid lifter handle), welding gloves (essential for working campfires), silicone mats, trivets, tongs, spatula, wood spoons.
Space efficiency is important - so I setup this kit to "nest" to be as compact as possible.
View attachment 67713
View attachment 67714
Here are the two dutchovens in action. The 9 is cooking a couple of rabbits in a slow cooked stew, while the 2.5 is making damper bread to go with the stew (after adding some Red Feather butter).
View attachment 67715
I picked up one of the smaller style trivet things at the dollar and more store for $2-3 - use it a lot in canning too. (It's probably not the same quality as the one shown, but it's worked for about 6-7 years now.)I love the trivets for the inside bottom of your Dutch ovens. I wish I had some. I generally use stones in place of a trivet.
And, i see you are an experienced campfire cook! One who cooks on campfire coals. I laugh every time I see a photo of someone cooking over campfire flames. I say to myself, "Show me your finished meal, I bet it's burnt!"
I like the idea of a trivet in my Dutch ovens when I bake. That way, the DO is acting as a true oven which allows heat to circulate on all sides of what ever is being baked. I have seen the results of others who try to bake bread or a cake directly in the bottom of a DO....usually resulting in burning where the bread/pastry touches the cast iron. I always bake my bread/pastry in a separate steel pan that fits inside of the DO. The pan is propped up off the bottom by stones. I'll have to look for trivets. Thanks for the tip.I picked up one of the smaller style trivet things at the dollar and more store for $2-3 - use it a lot in canning too. (It's probably not the same quality as the one shown, but it's worked for about 6-7 years now.)
I'm liking all the info being shared here. I've never even thought about putting a steel pan IN the DO - that's smart! I figured that's why dumplin's were born, so they cook on top of the food rather than in the bottom. Now I have to look for a pan(s) that fit in the DOs.I like the idea of a trivet in my Dutch ovens when I bake. That way, the DO is acting as a true oven which allows heat to circulate on all sides of what ever is being baked. I have seen the results of others who try to bake bread or a cake directly in the bottom of a DO....usually resulting in burning where the bread/pastry touches the cast iron. I always bake my bread/pastry in a separate steel pan that fits inside of the DO. The pan is propped up off the bottom by stones. I'll have to look for trivets. Thanks for the tip.
I normally will use round layer cake pans. They are sold in a variety of sizes.I'm liking all the info being shared here. I've never even thought about putting a steel pan IN the DO - that's smart! I figured that's why dumplin's were born, so they cook on top of the food rather than in the bottom. Now I have to look for a pan(s) that fit in the DOs.
I normally will use round layer cake pans. They are sold in a variety of sizes.
I love the trivets for the inside bottom of your Dutch ovens. I wish I had some. I generally use stones in place of a trivet.
And, i see you are an experienced campfire cook! One who cooks on campfire coals. I laugh every time I see a photo of someone cooking over campfire flames. I say to myself, "Show me your finished meal, I bet it's burnt!"
Here is my ignorance showing, but why does it matter what the cook book says? I have plenty recipes that say charcoal and I just use wood embers. Admittedly it does take more finesse because you can't just drop 6 or 10 briquettes on top as the recipe dictates. Instead you use normal wood embers and yes sometimes they need replacing etc. You need to keep a closer eye on things. But the food cooks through none the less, and tastes just the same.I keep looking for a Dutch oven cookbook that doesn't use charcoal. I have 3 Dutch ovens and will start using them this summer. I have a 10" I bought when I was 13-14 years old. I BSR 12" deep oven and a BSR 14" oven. Can't wait.
By charcoal do you mean those kingsford briquets? Most real cooking is over "coals", hot embers left after a fire has burned down.I keep looking for a Dutch oven cookbook that doesn't use charcoal. I have 3 Dutch ovens and will start using them this summer. I have a 10" I bought when I was 13-14 years old. I BSR 12" deep oven and a BSR 14" oven. Can't wait.
Enter your email address to join: